Waterproofing & Injection Products

Polyurethane and epoxy injection resins, nano sealers and protective coatings that stop water at the source.

In Stock

Resins & Coatings

AquaBlock PU-300 Foaming Resin

Single-component hydrophobic polyurethane grout that reacts with water to form a tough closed-cell foam, sealing gushing leaks in concrete and masonry.

View Details

In Stock

Resins & Coatings

EpoSeal LV-55 Structural Epoxy

Low-viscosity, high-strength two-part epoxy for structural crack injection that bonds dry concrete back to monolithic strength.

View Details

In Stock

Resins & Coatings

FlexFoam PU-110 Rapid Injection Resin

Fast-reacting single-component polyurethane that foams into a flexible, water-tight seal — ideal for emergency leak stopping.

View Details

In Stock

Resins & Coatings

DuoSeal PU-220 Two-Component Resin

Two-component polyurethane that foams rapidly inside water-filled cracks to deliver a dense, durable seal in wet conditions.

View Details

In Stock

Resins & Coatings

DuraCoat EP Self-Levelling Floor System

Two-component, self-smoothing epoxy floor coating that cures to a seamless, chemical-resistant and easy-to-clean surface.

View Details

In Stock

Resins & Coatings

HydroStop 1K Leak-Seal Resin

Single-component, high-polymer polyurethane that cures into a tough elastic seal for permanently stopping persistent leaks.

View Details

In Stock

Resins & Coatings

NanoGuard SI Invisible Water Repellent

Solvent-based silane/siloxane nano treatment that penetrates masonry and concrete to form an invisible, breathable water-repellent shield.

View Details

In Stock

Resins & Coatings

ClearShield UV Liquid Membrane

Transparent, film-forming liquid membrane that cures into an elastic, UV-stable waterproof layer over tiles, glass and exposed surfaces.

View Details

In Stock

Resins & Coatings

ThermaCool Reflective Roof Coating

Heat-reflective, waterproof roof coating that lowers surface temperature while sealing the roof against water ingress.

View Details

In Stock

Resins & Coatings

SealFlex PU-35 Joint Sealant

High-strength, fast-curing polyurethane sealant for durable, flexible bonding and sealing of joints and gaps.

View Details

In Stock

Resins & Coatings

AnchorFix E-360 Injection Mortar

High-performance two-component epoxy injection mortar in a 360 ml cartridge for heavy-duty chemical anchoring of rebar and threaded rods.

View Details

In Stock

Resins & Coatings

AnchorFix E-585 Injection Mortar

Large-format 585 ml two-component epoxy injection mortar for high-volume chemical anchoring on bigger structural projects.

View Details

High- and low-pressure pumps, mixers and sprayers built for single- and two-component injection work.

In Stock

Grouting Machines

TitanPump HP-650 High-Pressure Injection Unit

Heavy-duty single-component injection pump delivering up to 650 bar for forcing PU and epoxy resins deep into cracks.

View Details

In Stock

Grouting Machines

GeminiFlow 2K Dual-Component Pump

Portable two-component grouting pump that meters and mixes 1:1 resins at the nozzle, ideal for fast-setting PU systems.

View Details

Out of Stock

Grouting Machines

HandGrout M1 Manual Cement Pump

Hand-operated grouting pump for filling voids, honeycombing and concrete junctions with cementitious grout — no power required.

View Details

In Stock

Grouting Machines

ElectroGrout 1800 Multi-Function Machine

Portable 1800 W electric machine for cement grouting and plaster spraying, with multi-speed control for varied mixes.

View Details

In Stock

Grouting Machines

CoatMaster AX-595 Airless Sprayer

High-power airless sprayer with electronic pressure control for fast, even application of waterproof coatings and paints.

View Details

In Stock

Grouting Machines

CoatMaster AX-395 Airless Sprayer

Compact 1300 W airless sprayer delivering steady pressure and flow for coatings, primers and paints on mid-size projects.

View Details

Manual and coaxial dispensing guns for PU sealants, sausages and chemical anchor cartridges.

In Stock

Sealant Guns

ProCaulk 600 Manual Sealant Gun

Aluminium-body 600 ml manual caulking gun with a 10:1 thrust ratio for smooth dispensing of PU sealants and adhesives.

View Details

In Stock

Sealant Guns

ProCaulk 600 Pro Sausage Gun

Nine-bearing aluminium-alloy 600 ml sausage gun engineered for high thrust, smooth control and heavy daily use.

View Details

In Stock

Sealant Guns

AnchorShot 380 Coaxial Gun

Coaxial dispensing gun with a 25:1 thrust ratio built for 380 ml chemical anchor and injection-mortar cartridges.

View Details

Mechanical high-pressure injection packers in steel, aluminium and brass for durable crack sealing.

In Stock

Metal Packers

SteelLock Injection Packer

High-pressure steel mechanical injection packer for reliable PU and epoxy crack sealing across walls, slabs and columns.

View Details

In Stock

Metal Packers

AluLite Injection Packer

Lightweight aluminium mechanical injection packer offering corrosion resistance and easy handling for crack sealing.

View Details

In Stock

Metal Packers

SurfaceBond Glue-On Packer

Low-pressure surface-mounted packer bonded over a crack with epoxy paste — ideal for thin slabs and hairline cracks where drilling is undesirable.

View Details

In Stock

Metal Packers

SteelLock Conical-Head Packer

Steel drill-in packer with a conical-head nipple and adhesive rubber sleeve for secure, high-pressure resin injection.

View Details

In Stock

Metal Packers

SteelLock Flat-Head Packer

Steel injection packer with a flat-head nipple and extended rubber sleeve, designed for brickwork, hollow masonry and double-leaf walls.

View Details

In Stock

Metal Packers

QuickSet One-Day Packer

Single-use injection packer with a built-in double non-return valve, designed to be installed and removed within the same working day.

View Details

Drive-in, adhesive, lamella and wedge plastic packers for fast, drill-light injection setups.

In Stock

Plastic Packers

PolyBond Adhesive Packer

Surface-glued plastic packer with an M8 internal thread for low-pressure injection where drilling must be avoided.

View Details

In Stock

Plastic Packers

DriveSeal Lamella Packer 14 mm

Drive-in plastic packer (14 × 100 mm) with flexible lamellae that grip the drilled hole for a fast, pressure-tight seal.

View Details

In Stock

Plastic Packers

DriveSeal Lamella Packer 18 mm

Larger drive-in plastic packer (18 × 120 mm) with a flat-head nipple, suited to veil injection and higher-flow resin work.

View Details

In Stock

Plastic Packers

DriveSeal Progressive Lamella Packer

Slim-diameter plastic packer with progressively sized lamellae for a secure grip in variable or slightly oversized holes.

View Details

In Stock

Plastic Packers

WedgeFix No-Drill Packer

Compact wedge packer driven directly into a crack — no drilling required — with an integrated check valve, rated to around 50 bar.

View Details

In Stock

Plastic Packers

HoseConnect Injection Termination Packer

Plastic HO-END connector for terminating injection-hose loops at construction joints, enabling controlled resin injection through the hose.

View Details